Contact us

Contact us

  1. captcha

VIKING UNIVERSAL SEAL SERIES PUMP MODEL K224A FOR PUMPING ETHYLENE VINYL ACETATE, POLYAMIDE AND POLYURETHANE

Polymer pump at a manufacturer of hot melt glues and adhesives

VIKING K224A PUMPING POLYMERS

Viking internal gear pump model K224A STLFD BZBZ JH, long coupled with baseplate, coupling and guard to a 14.56:1 ratio gearbox, 98 rpm output speed, fitted with a 2.2 kW, 1425 rpm, 230/400 volt, three phase, 50 Hz, IP55 motor. Pump is jacketed for pre-heating before start-up.

  • Liquid - Various polymers including Ethylene Vinyl Acetate, Polyamide and Polyurethane
  • Flow Rate - 40 l/min
  • Pressure - 5 Bar
  • Viscosity - 2,000 cP
  • Wetted Materials - Cast Iron with steel rotor, bronze bushings

« Back to product page