| |
| Finish Thompson PF Series Drum Pumps |
 Back |
How to select a drum pump>
 |
|
The PF Series drum pump is unmatched in performance when compared to any competitive drum pump. The PF Series is a revolution in drum pump design
Features
- Sealless
- Unique flow orifice (except PFS)
- Pump interchangeable with motors
- Easy disassembly for cleaning
- Dry run capability
Download Brochures> |
Performance
- 1.8 sg
- Maximum temperatures: PFP - 70 deg C
PFM - 70 deg C
PFV - 49 deg C
PFS - 105 deg C
| ELECTRIC - 50/60 HZ |
AIR |
| 150 l/min max |
83 l/min max |
| 24 m max |
11.6 m max |
| 500 cps max |
330 cps max |
NOTE:
With M6XA explosion proof motor peformance is reduced to 26.4 lpm and 5.5 m
maximum. This reduction helps to reduce static electricity when pumping flammable fluids
When pumping flammables, use explosion proof motors on stainless steel tubes with a static protection kit.
The Static Protection Kit part number A101521 comprises of 4ft grounded XLPE (Cross Linked Polyethylene) hose, 6ft motor/tube grounding wire with clamps and stainless steel hose clips. Hose has threaded end to attach aluminum nozzle part number J101929. Special hose lengths available upon request.
When handling non-flammable fluids in a hazardous area the M6A motor can be used.
|
Tube Specifications
| Model |
Tube |
Seal |
Shaft |
Internals |
Hose Size Required |
| Material |
Diameter |
Length |
| PFP |
Polypropylene |
51 mm |
69 cm
102 cm
122 cm |
Sealless |
Alloy 625 |
Polypropylene, Teflon, PVDF and Viton |
25 mm |
PFM |
Polypropylene |
51 mm |
69 cm
102 cm
122 cm |
Sealless |
SS |
Polypropylene, Teflon, PVDF and Viton |
25 mm |
| PFV |
PVDF |
51 mm |
69 cm
102 cm
122 cm |
Sealless |
Alloy 625 |
PVDF,
Teflon and Viton |
25 mm |
| PFS |
SS |
51 mm |
69 cm
102 cm
122 cm |
Sealless |
SS |
Stainless Steel
Teflon,
Tefzel and Viton |
25 mm |
PFSA
|
SS |
51 mm |
69 cm
102 cm
122 cm |
Sealless |
SS |
Stainless Steel, Teflon, Tefzel and Kalrez |
25 mm |
Motor Specifications
| Model |
Type |
Certifications |
Electrical Requirements |
Power |
RPM |
| M3V-UK |
ODP |
|
115VAC/50-60 Hz |
650 watts |
3,500 - 10,000 |
| M3T |
TEFC |
CSA |
115VAC/50-60 Hz |
640 watts |
10,000 |
| M5V |
IP24 |
CE |
230VAC/50-60 Hz |
650 watts |
3,500 - 10,000 |
| M5T |
TEFC
IP54 |
CE |
230VAC/50-60 Hz |
640 watts |
10,000 |
| M6 |
Air |
CE |
- |
370 watts |
300 - 6,000 |
| M6X |
Air |
CE |
- |
560 watts |
300 - 3,000 |
| M6A |
Exproof Air |
CE/ATEX |
- |
370 watts |
300 - 6,000 |
| M6XA |
Exproof Air |
CE/ATEX |
- |
560 watts |
300 - 3,000 |
| M10X* |
EXP -IP54 |
CE Ex |
230VAC/50-60 HZ |
640 watts |
10,000 |
* Recommended for pumping non-flammables in an explosion proof environment
M3V-UK and M5V are variable speed
Electric motors are equipped with 3.5 m cord, circuit breaker with manual reset, internal cooling fan and built in on/off switch. Motors are rated continuous duty. |
