| Flow rates |
1 - 7241 ml/min (depending on mounted pump head) |
| Operating panel |
7 button membrane key pad
LED display |
| Programme Memories |
4 |
| Programming (similar to PLC) |
4 individual programmes (command sequences) created in a PC can be stored in the pump. The user can run the programmes using the pump as a stand-alone unit |
| Operating modes |
pumping by drive speed (rpm)
pumping by flow rate (ml/min)
dispensing by volume (ml)
dispensing by time (0.1 s up to 999 hrs)
dispensing by volume within a pre-set time
interval dispensing by volume with a pause
interval dispensing by time with a pause
setting the number of dispensing cycles
pause time setting (from 0.1 s up to 999 hrs) |
| Calibrating function |
for flow rate (ml/min)
for dispensing volume (ml) |
| Motor Speed |
60 - 6000 rpm |
| Speed setting |
digital speed setting (resolution 1 rpm) |
| Speed control |
closed loop control for pressure independent speed |
| RS232 interfaces |
RS232 'in' - for operation controlling via PC
RS232 'out' - for cascading up to 8 pumps |
| Analogue input |
speed control (0-5 or 0-10V / 0-20 or 4-20mA) |
| Analogue output |
speed monitoring (0-10 VDC or 0-12 kHz) |
| Digital input (TTL level) |
start/stop, autostart, 2 universal inputs |
| Differential pressure |
max. 5.2 bar / 75.4 psi (depending on pump head) |
| Motor type |
DC motor |
| Power consumption |
150 W |
| Mains connection |
85 - 264 VAC / 47 - 60 Hz |
| Protection rating |
IP65 |
| Depth / Width / Height |
260 x 160 x 262 mm |
| Weight |
6.9 kg (without pump head) |
| Accessories |
software ' ProgEdit', pressure control unit, foot switch |
Back
