| |
Micropump Gear Pump with Ismatec Drive Units |
 Back |
Micropump magnetically coupled gears with Ismatec drives have been developed for continuous duties, 24 hours a day, 7 days a week. These pulse free systems allow very accurate dispensing and pumping of a wide range of fluids at capacities up to 7000 ml/min at pressures up to 5.2 bar
|
Products in the Range
Click on images below for full picture and further product information
 MCP-Z Process |
 |
| 1 - 7241 ml/min up to 5.2 bar Ismatec Pumps |
| Interchangeable pump heads, programmable with calibrating functions, IP65 protection rating (dust tight and waterproof against water jets) and stainless steel housing |
- dispensing and delivery pumps
- variable speed drive
- RS232 and / or analogue interface |
| Download Brochures> |
|
|
|
| MCP-Z Standard
|
 |
| 1 - 7241 ml/min up to 5.2 bar Ismatec Pumps |
| Interchangeable pump heads, programmable with calibrating functions, IP30 protection |
- dispensing and delivery pumps
- variable speed drive
- RS232 and / or analogue interface |
| Download Brochures> |
|
|
|
| BVP-Z Standard
|
 |
| 1 - 7241 ml/min up to 5.2 bar Ismatec Pumps |
Interchangeable pump heads.
3 digit potentiometer without dispensing functions, IP30 protection |
- variable speed drive
- analogue interface |
| Download Brochures> |
|
|
|
| REGLO Z-Analogue
|
 |
| 1 - 3290 ml/min up to 5.2 bar Ismatec Pumps |
| Interchangeable pump heads, 3 digit potentiometer without dispensing functions, IP30 protection |
- variable speed drive
- analogue interface |
| Download Brochures> |
|
|
|
| REGLO Z-Digital |
 |
1 - 3290 ml/min up to 5.2 bar Ismatec Pumps
|
| Interchangeable pump heads, programmable with calibrating functions, IP30 protection |
- dispensing and delivery pumps
- variable speed drive
- RS232 and / or analogue interface |
| Download Brochures> |
|
|
|
|
