Viking Universal Mag Drive Pump

The Universal Mag Drive provides a dimensionally interchangeable footprint with the Viking's Universal Seal and Heavy Duty Bracketed Pumps. This allows for an easy upgrade from packing or mechanical seals to sealless Mag Drive technology, providing the highest level of liquid containment available today.

Viking Advantages

• Performance
  
  
• No packing or mechanical seals means no seal failure or replacement
• Easily handles both high and low viscosity fluids
• Reduce material loss, contamination and general housekeeping
• Simple design, easy to maintain
• Proven reliability, 100 years of experience
  
  
• Technology
• Dimensionally interchangeable with Viking's Universal Seal and Heavy Duty Bracketed pumps
• Proven sealless design
• Simple solution for upgrading existing pumps
• Short-term, dry-run capabilities for easy line clearing or emptying tanks without damaging pump
• Viking developed the 1st commercially available internal gear mag drive pump
  
  
  
• Productivity
• Highest level of liquid containment available
• Eliminates downtime due to seal replacement
• Local inventory and support worldwide
• Bi-directional pump design for enhanced application flexibility
• Lower life cycle cost


• Available Options
• Multiple port sizes, types and ratings available including threaded, raised and flat face flanged
• Jacketing options available for critical areas of pump including the casing, head and relief valve
• Materials of construction - steel, stainless steel and cast iron
• Special construction options for bushings, shaft, pin and clearances available
• Protective device options include: power load monitor, temperature monitor and low flow dector
• Other options include: casing and canister drains and gauge ports
  

Applications

• Hard-to-Seal Liquids - Isocyanates, Sodium Hydroxide, Adhesives, Epoxy Resins
• Hazardous and Reactive Liquids - Volative Organic Chemicals, Hazardous Chemicals, LPG and Ammonia, Reactive Chemicals
• Higher Pressures - Refineries, Chemical and Polymer Plants, Paper Mills, Pipelines

Pump Benefits

Proven Design
Pump has only two moving parts proven in thousands of tough applications around the world. Simple design minimises service requirements while providing unmatched durability and reliability

Heavy Duty Bearings and Bushings
Proven, rugged pump design equipped with heavy duty bearings and bushings. Provides enhanced shaft support extending pump and in-canister bushing life

Innovative Magnet Design
Inner magnet is encapsulated in a laser welded stainless steel canister. One piece design extends pump life and eliminates maintenance

Dimensionally Interchangeable
Proven, dimensionally interchangeable design for Viking's Universal Seal and Heavy Duty Bracketed pumps as well as competivie pumps that duplicate Viking's footprint. Provides simple solution for upgrading existing pumps, utilizing existing reducer, motor, coupling, guard, wiring and base

Multiple Port Configurations
Multiple port sizes, types and ratings are available including threaded, raised and flat face flanged. Provides easy solution to match customer requirements for quick, easy installation

Rotatable Casing
Universal Seal pumps are equipped with casings that can be positioned to meet common piping configurations, including 90 deg and opposite porting. Shortens and simplifies installation with no special tools required for quick installation

No Special Tools Required
Jack bolts for coupling disassembly are standard with the pump. Simplifies maintenance and reduces planned downtime

Drive Options
Multiple drive options are available including reducer and variable speed drive. Drive configurations provide easy solutions to match customer requirements for quick, easy installation

Lifting Lug Included
Allows for easier pump handling when installing, removing or disassembling pump. Simplifies installation

Externally Adjustable Relief Valve
Relief valve can be adjusted while in service when process conditions change. Provides maximum process up-time

Relief Valve, Standard
Pumps come with an adjustable internal pressure relief valve on standard design. Jacketed pressure relief valves are available in steel and stainless. Protects pump from over pressure

Multiple Material Options
Wide array of pump construction materials available for internal and external components alow broad chemical and temperature compatilibility on lubricating and non-lubricating liquids to match your application need. Custom configured pumps lengthen life of pump for lower total cost of ownership

Short Term Run-Dry Capability
Short term run-dry capability is possible due to state of the art design and magnet technology. Protects the pump during priming and accidental empty tank situations

Bi-directional Pump Design
Bi-directional pumping design eliminates cost of second pump and piping needed for loading or unloading or line stripping. Provides application flexibility and reduces system costs.

Adjustable End Clearance
Allows the pump to be adjusted for different viscosities and temperatures if process changes, increasing productivity. Single point adjustment maintains and maximises pump efficiency, extending life.

Dual Thrust Control Washers
Positive control of rotor position for more accurate flow, also reduces pump wear. Provides lower life cycle costs and improves process control capability

Optimized Efficiency
Proven, optimized gear and pump geometry maximizes overall efficiency. Reduces product operating cost providing a lower total cost of ownership

Higher Pressure Capabilities
Thrust control, enhanced shaft support and a wide selection of materials permits higher pressure capabilities. Permits single pump standardization for multiple liquids and applications

Specifications

(3) Ports are tapped for standard (NPT) pipe
(4) Ports are suitable for use with 125# ANSI cast iron companion flanges or flanged fittings
(5) Ports are suitable for 150# ANSI steel or stainless steel companion flanges or flanged fittings