| Flow rates |
0.025 - 2300 ml/min (depending on the piston pump head) |
| Operating panel |
7 button membrane key pad
LED display |
| Memory |
4 sets of operating parameters can be stored |
| Programming (similar to PLC) |
4 individual command sequences programmed in a PC can be stored in the pump. The user can run the programmes using the pump as a stand-alone unit |
| Operating modes |
pumping by drive speed (rpm)
pumping by flow rate (ml/min)
adjustable stroke volume
dispensing by volume (ml)
dispensing by time (0.1 s up to 999 hrs)
dispensing by volume within a pre-set time
interval dispensing by volume with a pause
interval dispensing by time with a pause
setting the number of dispensing cycles
pause time setting (from 0.1 s up to 999 hrs)
piston stroke back steps for drip free dispensing
reversible rotation direction |
| Calibrating function |
for flow rate (ml/min)
for dispensing volume (ml) |
| Drive speed |
10.0 - 1800.0 rpm |
| Speed setting |
digital speed setting (resolution 0.1 rpm) |
| Speed control |
closed loop control for pressure independent speed |
| RS232 interfaces |
RS232 'in' - for operation controlling via PC
RS232 'out' - for cascading up to 8 pumps |
| Analogue input |
speed control (0-5 or 0-10V / 0-20 or 4-20mA) |
| Analogue output |
speed monitoring (0-10 VDC or 0-7.2 kHz) |
| Digital input (TTL level) |
start/stop, rotation direction, autostart, 2 universal inputs |
| Digital output (PWM) |
2 universal outputs |
| Differential pressure |
6.9 bar (100 psi) (depending on pump head) |
| Motor type |
DC motor |
| Power consumption |
100 W |
| Mains connection |
85 - 264 VAC / 47 - 60 Hz |
| Protection rating |
IP65 |
| Depth / Width / Height |
220 x 155 x 260 mm (without pump head) |
| Weight |
6.9 kg (without pump head) |
| Accessories |
software ' Progedit', pressure control unit, foot switch |
Back
