| |
THESE PUMPS ARE NO LONGER AVAILABLE FROM MICHAEL SMITH ENGINEERS
Nikkiso Metering Pumps - MX Series |
These high accuracy, high pressure metering, positive displacement pumps are all designed with slow stroking speeds to ensure long pump life and minimal maintenance requirements. Nikkiso pumps are specified in applications where repeatable, linear, highly accurate pumping is required.
 |
|
Nikkiso Metering Pumps - The Best Choice
- No leakage
- High accuracy
- High efficiency
Designed and built for an uninterrupted continuous service life of several decades under normal specified operating conditions.
Download Brochures> |
- Capacities from 0.5 lit/min to 114 lit/min and maximum discharge pressures up to 500 Bar
- Wide range of wetted materials, motors, drives and controllers are available
- Options include pumps for slurries, viscous liquids, high temperature liquids and volatile liquids
|
- Satisfies API 675 with a steady state flow accuracy of ± 0.5% and a turn down ratio of 10:1
- Diaphragm Rupture Detector increases the safety of the pump system
- Hydraulically actuated diaphragm facilitates high accuracy and repeatability
- All moving parts are oil lubricated and require little maintenance
- The hydraulic system is automatically vented and protected by an integral relief valve
- Speed control by frequency converter is possible within a range of 10:1
- Special pump heads are available for solidifying liquids, gas forming liquids, high viscosity liquids and slurries
| X-Crank
The newly developed X-crank stroke control mechanism enables higher pump speed and piston forces thus, decreasing the size of the pump at the same time.
The stroke length is digitally indicated in 0.1% increments.
Stroke control is possible from 0% to 100% whilst the pump is stopped or operating.
Stroke adjustment is possible manually, electrically or pneumatically. |
|
|
Pump capacity range
|
|
