ECOLINE VC-280 (Microprocessor controlled tubing pump) |
 |
| Characteristics |
- high flow tubing pump for accurate and reproducible fluid transfer in laboratories and industry
- rugged stainless steel housing
- accurate and reproducible speed setting
- closed loop control for pressure independent speed
- interchangeable rotor for lower pulsation or elevated differential pressure
- analogue interface
|
| Flow rates |
1.7 - 5400 ml/min |
| Channels |
1 |
| Speed setting |
2-digit potentiometer, 1-99% |
| Rotor and tube bed |
2 stainless steel rollers
tube bed with translucent protection cover |
| Remote control |
Analogue interface |
| |
More Info> |
|
|
ECOLINE VC-380 (Microprocessor controlled tubing pump) |
 |
| Characteristics |
Same as VC-280 but
- 3 rollers providing lower pulsation
- slightly lower maximum flow rate
|
| Flow rates |
1.6 - 5000 ml/min |
| |
More Info> |
|
|
ECOLINE VC-360 (Microprocessor controlled tubing pump) |
 |
| Characteristics |
Same as VC-280 but
- 3 rollers providing lower pulsation
- reduced flow rate due to smaller tube sizes
- hinged tube bed with wide opening angle allowing rapid tube changeover
- no interchangeable rotor
- no safety cutout
|
| Flow rates |
0.25 - 1300 ml/min |
| |
More Info> |
|
|
ECOLINE VC-Easy-Load (Microprocessor controlled tubing pump) |
 |
| Characteristics |
Same as VC-280 but
- 3 rollers
- easily accessible pump head
- allows rapid tube changeover
- PSF housing (Polysulfone)
- stainless steel rotor
|
| Flow rates |
0.23 - 1600 ml/min
|
| |
More Info> |
|
|
ECOLINE VC-MS/CA8-6
(Microprocessor controlled tubing pump) |
 |
| Characteristics |
Same as VC-280 but
- 8 channel pump head
- Click'n'go cassettes providing defined and reproducible occlusion conditions
- 6 rollers for low pulsation
- takes 3-stop collared tubing
- no interchangeable rotor
- no safety cutout
|
| Flow rates |
0.005 - 150 ml/min (per channel)
|
| |
More Info> |
|
|
ECOLINE VC-MS/CA4-12 (Microprocessor controlled tubing pump) |
 |
| Characteristics |
Same as VC-280 but
- 4 channel pump head
- Click'n'go cassettes providing defined and reproducible occlusion conditions
- 12 rollers for low pulsation
- takes 3-stop collared tubing
- no interchangeable rotor
- no safety cutout
|
| Flow rates |
0.003 - 83 ml/min (per channel) |
| |
More Info> |
|
|