| |
IP and IPC Series Dispensing Pumps |
 Back |
Products in the Range
Click on images below for full picture and further product information
 IPC and IPC-N (Microprocessor controlled dispensing pump) |
 |
| Characteristics |
- microprocessor controlled drive
- 11 operating modes and calibrating functions
- extremely low pulsation
- for low flow, multi-channel fluid transfer and dosing or filling applications
- flow rate and dispensing volume can be calibrated
- planetary drive for very accurate pumping
- high repeatability on all channels
- 8 actively driven stainless steel rollers
- CA Click'n'go cassettes providing defined and repeatable occlusion conditions
- remote controllable via PC (RS232)
- paint finished stainless steel housing
|
| Flow rates |
0.0004 - 11 ml/min (per channel) (IPC-N Series)
0.002 - 44 ml/min (per channel) (IPC Series) |
| Channels |
4, 8, 12, 16 and 24 |
| Operating Panel |
6 button membrane key pad with LED display
various operating modes for dosing applications |
| Speed Setting |
in %, resolution 0.1% (rpm)
in µl/min or ml/min (flow rate) |
| Speed Control |
closed loop control for load independent speed |
| Remote Control |
RS232 'in' and 'out'
digital inputs (TTL level)
analogue input for speed control
analogue output for speed monitoring |
| |
More Info> |
|
|
|
| IP and IP-N (Microprocessor controlled delivery pump) |
 |
| Characteristics |
Same as IPC and IPC-N but
- no dispensing features
- no calibrating functions
- only 'run/stop', 'speed control' and 'direction'
|
| Flow rates |
0.0004 - 11 ml/min (per channel) (IP-N Series)
0.002 - 44 ml/min (per channel) (IP Series) |
| Channels |
4, 8, 12, 16 and 24 |
| Operating Panel |
6 button membrane key pad with LED display
2 LEDs indicating LOCAL and REMOTE operation |
| Speed Setting |
in rpm, resolution 0.1 rpm (IP) or 0.03 rpm (IP-N)
in %, resolution 0.1% (rpm) |
| Remote Control |
analogue interface (no RS232) |
| |
More Info> |
|
|
|
|
