| Characteristics |
microprocessor controlled
planetary drive with 8 actively driven stainless steel rollers
low pulsation
high repeatability on all channels
paint finished stainless steel housing |
| Tubing type |
2 stop colour coded tubing 0.13 - 3.17 mm id |
| Tube bed |
CA Click'n'go cassettes
simple handling
automatic occlusion setting
defined and reproducible occlusion conditions
each channel allows individual tubing selection |
| Operating panel |
6 button membrane key pad
LED display
MAX key for fast filling or emptying the tubing system |
| Operating modes |
pumping by drive speed (in %)
stand-by mode - prevents tubing system from drying out
reversible rotation direction |
| Rotor speed |
0.4 - 45.0 rpm (IP)
0.11 - 11.25 rpm (IP-N) |
| Speed setting |
in rpm, resolution 0.1 rpm (IP) or 0.03 rpm (IP-N) |
| Speed control |
closed loop control for load independent speed |
| Analogue input |
speed control (0-5 or 0-10V / 0-20 or 4-20mA) |
| Analogue output |
speed monitoring (0-10 VDC) |
| Digital inputs (TTL level) |
start/stop, rotation direction, autostart, |
| Differential pressure |
1.0 bar (14.5 psi) possible (depending on tubing material) small tubing diameters and/or cassettes with pressure lever allow higher pressures |
| Motor type |
DC motor |
| Power consumption |
30 W |
| Mains connection |
115 - 230 VAC, 50/60 Hz |
| Protection rating |
IP30 |
| Dimensions/Weight |
see table above |
| Accessories |
cassettes, foot switch |
Back
