IPC and IPC-N Back

If you require additional product information please fill in our information request form

IPC and IPC-N  
Model Order No Channels Flow rates ml/min per channel Dimensions
 D x W x H (mm)
Weight
KG
IPC 4 ISM 930 4 0.002 - 44 180 x 175 x 130 4.6
IPC 8 ISM 931 8 220 x 175 x 130 5.1
IPC 12 ISM 932 12 260 x 175 x 130 5.8
IPC 16 ISM 933 16 300 x 175 x 130 6.5
IPC 24 ISM 934 24 380 x 175 x 130 7.9
Model Order No Channels Flow rates ml/min per channel Dimensions
  D x W x H (mm)
Weight
KG
IPC-N 4 ISM 935 4 0.0004 - 11 180 x 175 x 130 4.6
IPC-N 8 ISM 936 8 220 x 175 x 130 5.1
IPC-N 12 ISM 937 12 260 x 175 x 130 5.8
IPC-N 16 ISM 938 16 300 x 175 x 130 6.5
IPC-N 24 ISM 939 24 380 x 175 x 130 7.9

Characteristics microprocessor controlled
planetary drive with 8 actively driven stainless steel rollers
low pulsation
high repeatability on all channels
paint finished stainless steel housings
Tubing type 2 stop colour coded tubing 0.13 - 3.17 mm id
Tube bed CA Click'n'go cassettes
simple handling
automatic occlusion setting
defined and reproducible occlusion conditions
each channel allows individual tubing selection
Operating panel 6 button membrane key pad
LED display
MAX key for fast filling or emptying the tubing system
Operating modes pumping by drive speed (in %)
pumping by flow rate (ml/min)
factory set flow rates for all available tube sizes
dispensing by volume (ml)
dispensing by time (0.1s up to 999 hrs)
dispensing by volume within a pre-set time
interval dispensing by volume with a pause
interval dispensing by time with a pause
setting the number of dispensing cycles
pause time setting (from 0.1s up to 999 hrs)
roller back steps for drip-free dispensing
standby mode - prevents the tubing system from drying out
reversible rotation direction
Calibrating function for flow rate (ml/min)
for volume (ml)
Rotor speed 0.4 - 45.0 rpm (IPC)
0.11 - 11.25 rpm (IPC-N)
Speed setting in %, resolution 0.1% (rpm)
in µl/min or ml/min (flow rate)
Speed control closed loop control for load independent speed
RS232 interface RS232 'in'   - for operation controlling via PC
RS232 'out' - for cascading up to 8 pumps
Analogue input speed control (0-5 or 0-10V / 0-20 or 4-20mA)
Analogue output speed monitoring (0-10 VDC or 0-10.9 kHz)
Digital inputs (TTL level) start/stop, rotation direction, autostart, 
Differential pressure 1.0 bar (14.5 psi) possible (depending on tubing material) small tubing diameters and/or cassettes with pressure lever allow higher pressures
Motor type DC motor
Power consumption 30 W
Mains connection 115 - 230 VAC, 50/60 Hz 
Protection rating IP30
Dimensions/Weight see table above
Accessories cassettes, foot switch

4 channels
4 channels
8 channels
8 channels
12 channels
12 channels
16 channels
16 channels
24 channels
24 channels
     
michael smith
engineers ltd
Email:       Freephone: 0800 316 7891
© 2006 Michael Smith Engineers | All Rights Reserved
NQA ISO 9001