| |
REGLO Series Dispensing Pump |
 Back |
Products in the Range
Click on images below for full picture and further product information
 REGLO Digital (Microprocessor controlled dispensing pump) |
|
| Characteristics |
- compact multi-channel tubing pump
- for low flow, multi-channel fluid transfer and dosing or filling applications
- 6, 8 and 12 roller rotors for extremely low pulsation
- 6 operating modes and calibration functions
- MS/CA Click'n'go cassettes providing defined and reproducible occlusion conditions
- remote controllable via PC (RS232)
|
| Flow rates |
0.001 - 68 ml/min (per channel) |
| Channels |
2 or 4 |
| Motor type |
DC motor |
| Speed control |
closed loop control for pressure independent speed |
| Speed Setting |
digital speed setting, resolution 0.1 rpm |
| Remote control |
RS232 'in' and 'out'
digital input and analogue output |
| |
More Info> |
|
|
|
| REGLO Analogue (Microprocessor controlled dispensing pump) |
|
| Characteristics |
Same as REGLO Digital but
- no LED display
- no calibration functions
- only 'start/stop', 'speed' and 'direction'
|
| Flow rates |
0.002 - 68 ml/min (per channel) |
| Speed Setting |
2 digit potentiometer, 1% steps |
| Remote Control |
analogue interface (no RS232) |
| |
More Info> |
|
|
|
| REGLO Quick (Microprocessor controlled dispensing pump) |
|
| Characteristics |
Same as REGLO Digital but
- single channel tubing pump
- easy accessible tube bed
- higher max flow rate
- no LED display
- no calibration functions
- only 'start/stop', 'speed' and 'direction'
|
| Flow rates |
2.1 - 230 ml/min |
| Channels |
1 |
| Speed Setting |
2 digit potentiometer, 1% steps |
| Remote Control |
analogue interface (no RS232) |
| |
More Info> |
|
|
|
|
