Construction Specifications
| Pump Series |
Construction Materials |
Tube Dia |
Max Temp. |
| |
Outer Tube |
Internals |
cm |
Deg C |
| PFM |
Polypro |
316SS, Polypro, FPM, PVDF |
5.1 |
71 |
| PFP |
Polypro |
Alloy 625, Polypro, FKM, PVDF |
71 |
| PFV |
PVDF |
Alloy 625, FKM, PVDF |
46 |
| PFS |
316SS |
316SS, FKM, ETFE |
105 |
| PFS (ATEX) |
316SS |
316SS, PTFE, Tefzel, Perlast |
104 |
Tube Lengths - 27" (69cm), 40" (102cm), 48" (122cm), 60" (152cm), 72" (183cm)
Performance Data
Pump Series |
Hose Size |
Maximum Flow ** |
Maximum Head** |
Max. Sp Gravity |
Max Viscosity - cP |
Electric lpm |
Air lpm |
Electric m |
Air m |
Electric |
Air |
PFP, PFM PFV, PFS |
1" |
151 |
83 |
24 |
11.6 |
1.8 |
500 |
300 |
**All testing performed with water at 20 Deg C. Actual performance can vary by +/- 10%. Actual peformance will decrease with increased fluid viscosity and specific gravity.
Viscosity Data
Viscosity Cp |
100 |
250 |
500 |
Max Flow lpm |
91 |
61 |
42 |
Max Head metre |
16 |
16 |
15 |
Note: results using electric motors
Motor Specifications
Model |
Type |
Certifications |
Electric/Air Requirements |
Power |
RPM |
M3V-UK |
Drip Proof |
CE |
1150VAC / 50-60 Hz |
650 watts |
3,500 - 10,000 |
M3T |
TEFC |
CSA |
115VAC / 50-60 Hz |
640 watts |
10,000 |
M5 |
IP24 |
CE |
230VAC / 50-60Hz |
640 watts |
10,000 |
M5T |
TEFC/IP54 |
CE |
230VAC/ 50-60Hz |
640 watts |
10,000 |
M6 |
Air |
CE |
80-100 psi @ 15-32 cfm |
370 watts |
300 - 6,000 |
M6X |
Air |
CE |
80-100 psi @ 15-32 cfm |
560 watts |
300 - 3,000 |
M6A* |
Exproof Air |
CE / ATEX |
80-100 psi @ 15-32 cfm |
370 watts |
300 - 6,000 |
M6XA |
Exproof Air |
CE / ATEX |
80-100 psi @ 15-32 cfm |
560 watts |
300 - 3,000 |
M10X* |
EXP-IP54 |
CE Ex |
230VAC / 50-60Hz |
640 watts |
10,000 |
Electric motors are equipped with 3.5m cord, circuit breaker with manual reset, internal cooling fan and built in on/off switch. Motors are rated continuous duty.
#When pumping flammables, use explosion proof M6XA air motor on a PFS (ATEX) tube with a static protection kit.
*Recommended for pumping non-flammables in an explosion proof environment with a PFS (ATEX) tube and static protection kit.
The static protection kit part no. A101521 comprises of 4ft grounded XLPE (Cross Linked Polyethylene) hose, 6ft motor/tube grounding wire with clamps and stainless steel hose clips. Hose has threaded end to attach aluminium nozzle part no. J101929.
Special hose lengths available upon request. Performance is reduced to 26.4 lmp and 5.5 m maximum. This reduction helps to reduce static electricity when pumping flammable fluids.
|
Back
