4 individual programmes (command sequences) created in a PC can be stored in the pump. The user can run the programmes using the pump as a stand-alone unit
Operating modes
pumping by drive speed (rpm) pumping by flow rate (ml/min) dispensing by volume (ml) dispensing by time (0.1 s up to 999 hrs) dispensing by volume within a pre-set time interval dispensing by volume with a pause interval dispensing by time with a pause setting the number of dispensing cycles pause time setting (from 0.1 s up to 999 hrs)
Calibrating function
for flow rate (ml/min) for dispensing volume (ml)
Motor Speed
60 - 6000 rpm
Speed setting
digital speed setting (resolution 1 rpm)
Speed control
closed loop control for pressure independent speed
RS232 interfaces
RS232 'in' - for operation controlling via PC RS232 'out' - for cascading up to 8 pumps
Analogue input
speed control (0-5 or 0-10V / 0-20 or 4-20mA)
Analogue output
speed monitoring (0-10 VDC or 0-12 kHz)
Digital input (TTL level)
start/stop, autostart, 2 universal inputs
Differential pressure
max. 5.2 bar / 75.4 psi (depending on pump head)
Motor type
DC motor
Power consumption
150 W
Mains connection
85 - 264 VAC / 47 - 60 Hz
Protection rating
IP65
Depth / Width / Height
260 x 160 x 262 mm
Weight
6.9 kg (without pump head)
Accessories
software ' ProgEdit', pressure control unit, foot switch