MCP-Z Standard
- Specifications
- Other Info
Specifications
| Flow rates | 1 - 7241 ml/min (depending on mounted pump head) |
|---|---|
| Operating panel | 6 button membrane key pad LED display |
| Memory | 4 sets of operating parameters can be stored |
| Operating modes | pumping by drive speed (rpm) pumping by flow rate (ml/min) dispensing by volume (ml) dispensing by time (0.1 s up to 999 hrs) dispensing by volume within a pre-set time interval dispensing by volume with a pause interval dispensing by time with a pause setting the number of dispensing cycles pause time setting (from 0.1 s up to 999 hrs) |
| Calibrating function | for flow rate (ml/min) for dispensing volume (ml) |
| Motor speed | 60 - 6000 rpm |
| Speed setting | digital speed setting (resolution 1 rpm) |
| Speed control | closed loop control for pressure independent speed |
| RS232 interfaces | RS232 'in' - for operation controlling via PC RS232 'out' - for cascading up to 8 pumps |
| Analogue input | speed control (0-5 or 0-10V / 0-20 or 4-20mA) |
| Analogue output | speed monitoring (0-10 VDC or 0-12 kHz) |
| Digital input (TTL level) | start/stop, autostart, |
| Differential pressure | max 5.2 bar / 75.4 psi (depending on pump head) |
| Motor type | DC motor |
| Power consumption | 150 W |
| Mains connection | 115 - 230 VAC, 50/60 Hz |
| Protection rating | IP30 |
| Depth / Width / Height | 220 x 155 x 260 mm (without pump head) |
| Weight | 6.4 kg (without pump head) |
| Accessories | foot switch |
