| |
Finish Thompson PP/PVDF Centrifugal
Magnet Drive Pumps
|
 Back |
|
These reliable, leak-free, magnet drive pumps are designed for pumping aggressive, hard to handle fluids. By using rare earth magnetic technology, Finish Thompson pumps give high performance from a compact, robust unit. |
- Capacities up to 50m3/hr and differential head up to 43 metres
- Available in a choice of wetted materials, certain models can run dry for up to 30 minutes without damage
- Can handle liquids at temperatures up to 105°C with specific gravities to 1.8
- Vertical configuration available for sump and tank emptying
|
Products in the Range
Click on images below for full picture and further product information
 Finish Thompson DB Series Magnetic Drive Pumps |
 |
DB Series magnetic drive pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.
|
 |
8 series of pumps covers flow rates up to 50 m3/hr and heads up to 43m |
|
Multiple impeller diameters allows hydraulic requirements to be precisely met |
|
Measurement free outer drive ensures optimum magnet alignment and easy motor installation |
|
NPT or BSP threads, raised face adjustable flanges or union |
|
Superior run dry ability helps protect the pump from system upset or operator error. Eliminates costly repairs and downtime |
| |
More Info> |
|
|
|
| Finish Thompson VKC Vertical Seal-less Centrifugal Pumps |
 |
The combination of magnetic drive technology with traditional sump pump design eliminates many of the problems usually associated with vertical pumps. The VKC pump uses a magnetic coupling to drive the impeller so there is no need for a secondary back-up impeller, therefore the problems of aeration or foaming are removed. Also, because the barrier between the driven and driving magnets is hermetically sealed, fumes cannot escape up the pump column, so the risk of corrosion on the motor or shaft is avoided. |
|
Available in PVDF or polypropylene, combined with absence of metallic parts or bearings means excellent chemical resistance. |
|
Five pumps in the range covers capacities up to 23 m3/hr at differential heads to 17 metres. |
|
Design incorporates modular components allowing pump length to be increased up to 90 cm, simply by adding 15 cm sections. |
| |
More Info> |
|
|
|
|
|
